Skip to main content

Industrial Maintenance Electrical & Instrumentation

Overview

The comprehensive Industrial Maintenance Electrical & Instrumentation (IME&I) curriculum prepares learners for a career as skilled electrical and instrumentation technicians. It covers the concepts technicians need to safely install, maintain, and troubleshoot electrical instruments and equipment in a range of applications.

The four-level Industrial Maintenance Electrical & Instrumentation curriculum complies with the U.S. Department of Labor’s standards for apprenticeship programs.

Craft Snapshot

Journey Level
Assessment Available
RECOMMENDED HOURS
197.5, includes Core
REVISED
2007, 3rd Edition
NCCERconnect Deliver instruction using our pre-loaded content and course management tools, streamline training, and track results through the online gradebook. Students learn using the interactive eTextbook and Media Library with Active Figures that bring the material to life, anytime and anywhere they choose.
Not Available
LANGUAGES
English
Orientation to the Trade
2.5 Hours

Module ID 40101-07: Covers the history of the trade, and provides an overview of the industrial maintenance craft. Describes apprenticeship and training programs, as well as career opportunities. Also describes the responsibilities and characteristics of successful workers.

Tools of the Trade
5 Hours

Module ID 40102-07: Introduces the hand and power tools used in industrial maintenance. Covers safety procedures and proper use of these tools.

Fasteners and Anchors
5 Hours

Module ID 40103-07: Covers hardware and systems used in industrial maintenance. Describes anchors and supports, their applications, and how to install them safely.

Oxyfuel Cutting
17.5 Hours

Module ID 40104-07: Explains the safety requirements for oxyfuel cutting. Identifies oxyfuel cutting equipment and provides instructions for setting up, lighting, and using the equipment. Explains how to perform straight line cutting, piercing, beveling, washing, and gouging.

Gaskets and Packing
10 Hours

Module ID 40105-07: Introduces gaskets and gasket material, packing and packing material, and types of O-ring material. Explains the use of gaskets, packing, and O-rings, and how to fabricate a gasket.

Craft-Related Mathematics
15 Hours

Module ID 40106-07: Explains how to use ratios and proportions, solve basic algebra, area, volume, and circumference problems, and solve for right triangles using the Pythagorean theorem.

Construction Drawings
12.5 Hours

Module ID 40107-07: Introduces plot plans, structural drawings, elevation drawings, as-built drawings, equipment arrangement drawings, P&IDs, isometric drawings, basic circuit diagrams, and detail sheets.

Pumps and Drivers
5 Hours

Module ID 40108-07: Explains centrifugal, rotary, reciprocating, metering, and vacuum pump operation and installation methods, as well as types of drivers. Describes net positive suction head and cavitation.

Valves
5 Hours

Module ID 40109-07: Identifies different types of valves and describes their installation, storage, and handling.

Introduction to Test Instruments
7.5 Hours

Module ID 40110-07: Introduces test equipment for industrial maintenance, including tachometers, pyrometers, strobe meters, voltage testers, and automated diagnostic tools.

Material Handling and Hand Rigging
15 Hours

Module ID 40111-07: Introduces the equipment and techniques of material handling, and describes the procedures for rigging and communicating with riggers.

Mobile and Support Equipment
10 Hours

Module ID 40112-07: Introduces the safety procedures and methods of operation for motorized support equipment, including forklifts, manlifts, compressors, and generators.

Lubrication
12.5 Hours

Module ID 40113-07: Explains lubrication safety, storage, and classifications. Also explains selecting lubricants, additives, lubrication equipment, and lubricating charts.

Industrial Safety for E&I Technicians
12.5 Hours

Module ID 40201-08: Covers safety rules and regulations for electrical workers, precautions for electrical hazards on the job, and the OSHA-mandated lockout/tagout procedure.

Introduction to the National Electrical Code®
5 Hours

Module ID 40202-08: Provides a road map for using the NEC®. Introduces the layout and types of information found within the code book. Allows trainees to practice finding information using an easy-to-follow procedure.

Electrical Theory
15 Hours

Module ID 40203-08: Introduces electrical concepts used in Ohm’s law as applied to DC series circuits. Includes atomic theory, electromotive force, resistance, and electric power equations. Introduces series, parallel, and series-parallel circuits. Covers resistive circuits, Kirchhoff’s voltage and current laws, and circuit analysis.

Alternating Current
20 Hours

Module ID 40204-08: Covers transformers, single-phase and three-phase power distribution, capacitors, the theory and operation of induction motors, and the instruments and techniques used in testing AC circuits and components.

E&I Test Equipment
10 Hours

Module ID 40205-08: Focuses on proper selection, inspection, and use of common electrical and instrumentation test equipment, including voltage testers, clamp-on ammeters, ohmmeters, multimeters, phase/motor rotation testers, data recording equipment, field communicators, pressure testers, and dead weight testers. Also covers safety precautions and meter category ratings.

Flow, Pressure, Level, and Temperature
15 Hours

Module ID 40206-08: Presents devices used to measure flow, pressure, level, and temperature, along with their principles of operation.

Process Mathematics
15 Hours

Module ID 40207-08: Covers measurement of mass, weight, pressure, temperature, and flow, conversion of units, and their application to industrial maintenance.

Hand Bending
10 Hours

Module ID 40208-08: Introduces conduit bending and installation. Covers the techniques for using hand-operated and step conduit benders, as well as cutting, reaming, and threading conduit.

Tubing
15 Hours

Module ID 40209-08: Introduces a variety of tubing, tubing materials, tools, and work practices. Covers proper storage and handling, cutting, deburring, reaming, bending, and flaring of tubing.

Clean, Purge, and Test Tubing and Piping Systems
7.5 Hours

Module ID 40210-08: Presents safe methods for cleaning, purging, blowing down, pressure testing, and leak testing tubing, piping, and hoses used in industrial maintenance.

Instrument Drawings and Documents, Part One
15 Hours

Module ID 40211-08: Introduces instrument symbols, abbreviations, and drawings and documents, including instrument indexes, installation detail drawings, location drawings, and control loops.

Conductors and Cables
10 Hours

Module ID 40212-08: Focuses on the types and applications of conductors and electrical cabling and covers proper wiring techniques. Stresses the applicable NEC® requirements.

Conductor Terminations and Splices
10 Hours

Module ID 40213-08: Describes methods of terminating and splicing conductors of all types and sizes, including preparing and taping conductors.

Hazardous Locations
10 Hours

Module ID 40301-09: Covers all classes of hazardous locations, including seals, components, and equipment approved for use in various hazardous locations.

Electronic Components
10 Hours

Module ID 40302-09: Introduces the principles of electronics and semiconductor theory, components, and applications.

E&I Drawings
10 Hours

Module ID 40303-09: Explains how to read and interpret piping and instrumentation drawings, loop sheets, flow diagrams, isometrics, and orthographics, in order to identify types of instrumentation and the specifications for installation.

Motor Controls
15 Hours

Module ID 40304-09: Describes selecting, sizing, and installing motor controllers. Also covers control circuit pilot devices and basic relay logic.

Distribution Equipment
17.5 Hours

Module ID 40305-09: Explains distribution equipment, including grounding, switchboard and ground fault maintenance, transformers, and electrical drawing identification.

Transformer Applications
7.5 Hours

Module ID 40306-09: Discusses transformer types, construction, connections, protection, and grounding along with capacitors and rectifiers.

Conductor Selection and Calculation
15 Hours

Module ID 40307-09: Covers the types of conductors used in wiring systems, including insulation, current-carrying capacity, and temperature ratings.

Temporary Grounding
15 Hours

Module ID 40308-09: Covers the methods used to eliminate or reduce electrical shock hazards to personnel working on electrical equipment.

Layout and Installation of Tubing and Piping Systems
22.5 Hours

Module ID 40309-09: Introduces piping and tubing layout procedures. Explains the steps for creating a hand-sketched isometric drawing that can be applied to a piping and tubing installation. Introduces methods and procedures used to measure, cut, bend, and support piping and tubing.

Machine Bending of Conduit
15 Hours

Module ID 40310-09: Covers bends in conduit up to six inches. Focuses on mechanical, hydraulic, and electrical benders.

Hydraulic Controls
15 Hours

Module ID 40311-09: Introduces hydraulic principles and fluids, functions and controls of system devices, hydraulic symbols, and drawings. Covers safety considerations for hydraulic systems, as well as troubleshooting.

Pneumatic Controls
15 Hours

Module ID 40312-09: Describes principles of atmospheric and compressed air gases, and how compressors transmit and treat compressed (pneumatic) air. Covers pneumatic system symbols, drawings, and system safety. Addresses the functions and control of pneumatic system components and provides guidelines for troubleshooting.

Motor-Operated Valves
15 Hours

Module ID 40313-09: Covers motor-driven valves, ranging from small, servo-mechanical actuators to large valves that could only be operated by several people if they were not motor driven. Includes electrical, pneumatic, and hydraulic operators.

Standby and Emergency Systems
12.5 Hours

Module ID 40401-09: Explains the installation, utilization, and maintenance requirements for standby and emergency electrical systems.

Basic Process Control Elements, Transducers, and Transmit
15 Hours

Module ID 40402-09: Discusses sensing and transmitting devices used in an instrumentation loop, along with the process variables measured by the detectors or sensors. Gives examples of technical manuals and specification sheets. Explains how control devices are selected, and how to draw basic control loop diagrams that include a measuring element, a transducer, and a transmitter.

Instrumentation Calibration and Configuration
10 Hours

Module ID 40403-09: Introduces methods of instrumentation calibration, including the three- and five-point methods. Covers components that require calibration in pneumatic, analog, and smart loops, as well as methods used to calibrate these components.

Pneumatic Control Valves, Actuators, and Positioners
40 Hours

Module ID 40404-09: Covers the construction, operation, and uses of control valves, actuators, and positioners that are driven, and in some cases controlled by, compressed air. Explains the installation and maintenance of these devices, and includes alignment and troubleshooting procedures.

Performing Loop Checks
7.5 Hours

Module ID 40405-09: Covers loop check steps, including verifying mechanical installation, validating that the loop has correct tag numbers, performing loop checks, and proving the loop.

Troubleshooting and Commissioning a Loop
10 Hours

Module ID 40406-09: Teaches troubleshooting techniques used to locate problems in control loops, and how to isolate a loop in order to troubleshoot it. Covers commissioning of a loop once it is repaired, loop checked, and calibrated.

Process Control Loops and Tuning
20 Hours

Module ID 40407-09: Describes control loops, devices, and terms. Introduces formulas and their applications to PID control. Offers a theory-based approach to PID control and its application in industrial process control. Addresses open, closed, and visual loop tuning.

Data Networks
15 Hours

Module ID 40408-09: Introduces terms associated with data network devices and computers used in industrial facilities. Explains how data network devices and computers are interconnected for communication purposes. Describes how open connectivity is used in industrial data networks, and explores the hardware devices used in a data highway system.

Programmable Logic Controllers
17.5 Hours

Module ID 40409-09: Introduces the application of PLCs in industrial process control, as well as the binary numbering system used in computer-based control. Covers components of PLCs, including power supplies, I/O modules, processor modules, types of communication bus, and memory.

Distributed Control Systems
17.5 Hours

Module ID 40410-09: Describes how DCS was developed by combining the technologies of single loop control, direct digital control, and supervisory control. Covers DCS hardware requirements, how control loops are implemented into a DCS, types of data transmission used in DCS, communication protocols, and human interfaces.

Instructor Resources

Instructor Toolbox

NCCER’s Instructor Toolbox provides easy access to important instructional resources for your training program. You’ll find downloadable course planning tools, examples of classroom activities and projects, and instructor tips and best practices to help you enhance your program.

Assessments & Craft Pro Resources

NCCER’s assessments evaluate the knowledge of an individual in a specific craft area and provide a prescription for upgrade training when needed. All assessments are based upon the NCCER Curriculum and have been developed in conjunction with subject matter experts from the industry. Click the assessment title below to open its specifications.

Electrical and Instrumentation Formula Sheet