Skip to main content

Construction Technology

Overview

Construction Technology provides leaners with key knowledge and principles of carpentry, masonry, concrete finishing, electrical work, HVACR and plumbing.

After completing this one-level curriculum, learners will be able to interpret construction drawings; perform quality concrete and brickwork; frame walls, ceilings, and floors of a structure; and install the proper wiring and piping for electrical, and plumbing systems.

Craft Snapshot

RECOMMENDED HOURS
427.5, includes Core
REVISED
2016, 4th Edition
NCCERconnect Deliver instruction using our pre-loaded content and course management tools, streamline training, and track results through the online gradebook. Students learn using the interactive eTextbook and Media Library with Active Figures that bring the material to life, anytime and anywhere they choose.
Available
LANGUAGES
English
Introduction to Masonry
12.5 Hours

Module ID 28101-13; from Masonry Level One: Covers basic masonry materials, tools, techniques, and safety precautions. Explains how to mix mortar by hand and lay masonry units. Also describes the skills, attitudes, and abilities of successful masons.

Masonry units and Installation Techniques
60 Hours

Module ID 28105-13; from Masonry Level One: Covers characteristics of block and brick; how to set up, lay out, and bond block and brick; how to cut block and brick; how to lay and tool block and brick; and how to clean block and brick once they have been laid. Describes masonry reinforcements and accessories used to lay block and brick professionally and safely.

Floor Systems
27.5 Hours

Module ID 27105-13; from Carpentry Level One: Covers framing basics and the procedures for laying out and constructing a wood floor using common lumber, as well as engineered building materials.

Ceiling Joist and Roof Framing
40 Hours

Module ID 27112-13; from Carpentry Level One: Describes types of roofs and provides instructions for laying out rafters for gable roofs, hip roofs, and valley intersections. Covers stick-built and truss-built roofs. Includes the basics of roof sheathing installation.

Roofing Applications
25 Hours

Module ID 27202-13; from Carpentry Level Two: Describes how to properly prepare the roof deck and install roofing for residential and commercial buildings.

Wall Systems
20 Hours

Module ID 27111-13; from Carpentry Level One: Describes procedures for laying out and framing walls, including roughing-in door and window openings, constructing corners, partition Ts, and bracing walls. Includes the procedure to estimate the materials required to frame walls.

Exterior Finishing
35 Hours

Module ID 27204-13; from Carpentry Level Two: Covers the various types of exterior finish materials and their installation procedures, including wood, metal, vinyl, and fiber-cement siding.

Basic Stair Layout
12.5 Hours

Module ID 27110-13; from Carpentry Level One: Introduces types of stairs and common building code requirements related to stairs. Focuses on techniques for measuring and calculating rise, run, and stairwell openings, laying out stringers, and fabricating basic stairways.

Electrical Safety
10 Hours

Module ID 26102-14; from Electrical Level One: Covers safety rules and regulations for electricians, including precautions for electrical hazards found on the job. Also covers the OSHA-mandated lockout/ tagout procedure.

Residential Electrical Services
15 Hours

Module ID 26111-14; from Electrical Level One: Covers the electrical devices and wiring techniques common to residential construction and maintenance. Allows trainees to practice making service calculations. Stresses the applicable NEC® requirements.

Introduction to HVAC
7.5 Hours

Module ID 03101-13; from HVAC Level One: Covers the basic principles of heating, ventilating, and air conditioning, career opportunities in HVAC, and how apprenticeship programs are constructed. Basic safety principles, as well as trade licensure and EPA guidelines, are also introduced.

Introduction to Drain, Waste, and Vent (DWV) Systems
10 Hours

Module ID 02111-12; from Plumbing Level One: Explains how DWV systems remove waste safely and effectively. Discusses how system components, such as pipe, drains, traps, and vents work. Reviews drain and vent sizing, grade, and waste treatment. Discusses how building sewers and sewer drains connect the DWV system to the public sewer system.

Plastic Pipe and Fittings
12.5 Hours

Module ID 02106-12; from Plumbing Level One: Introduces different types of plastic pipe and fittings used in plumbing applications, including ABS, PVC, CPVC, PE, PEX, and PB. Describes how to measure, cut, join, and support plastic pipe according to the manufacturer’s instructions and applicable codes. Discusses pressure testing of plastic pipe once installed.

Copper Pipe and Fittings
12.5 Hours

Module ID 02107-12; from Plumbing Level One: Discusses sizing, labeling, and applications of copper pipe and fittings, and reviews the types of valves that can be used on copper pipe systems. Explains proper methods for cutting, joining, and installing copper pipe. Addresses insulation, pressure testing, seismic codes, and handling and storage requirements.

Cabinetmaking
35 Hours

Module ID 27501-15: This module expands on the knowledge and skills gained through the Carpentry Curriculum and provides the basic information needed to construct and apply finishes to custom cabinetry. It identifies and discusses various types of wood products, wood-joining techniques, power tools, cabinet doors, shelves, and hardware. Specific guidance is also provided for the installation of laminated countertops.

Cabinet Installation
10 Hours

Module ID 27211-13; from Carpentry Level Two: Provides detailed instructions for the selection and installation of base and wall cabinets and countertops.

Introduction to Construction Equipment
7.5 Hours

Module ID 27406-14; from Carpentry Level Four: Introduces construction equipment, including the aerial lift, skid steer loader, electric power generator, compressor, compactor, and forklift. An overview of general safety, operation, and maintenance procedures is provided.

NCCERconnect

Optimize your classroom time, while accelerating knowledge for learners. NCCERconnect works to provide learners with always-available access to online training materials, including videos, interactives, a rich eText, practice quizzes and other engaging content.

  • Mobile access to the eText also allows for learning on-the-go.
  • Instructors can get started quickly with pre-built assignments, use the robust course tools for class management, and track student participation and results through the online gradebook.
  • Designed to help learner engagement in any classroom, whether a blended, virtual or traditional classroom environment.

Instructor Resources

Instructor Toolbox

NCCER’s Instructor Toolbox provides easy access to important instructional resources for your training program. You’ll find downloadable course planning tools, examples of classroom activities and projects, and instructor tips and best practices to help you enhance your program.

Instructor Requirements

There are no additional or special requirements for instructors to be certified to teach Construction Technology. However, instructors for this program typically have work experience in residential construction or remodeling. General contractors or someone with construction experience that involves some knowledge of multiple crafts are ideal instructors for this program.